Event pipe and drape system, The drape
panels on each drape support (prolonged out to 10’) planning them for hanging.
The drape panels have a pocket sewn on top of the drape – the drape support
slides inside it. Make sure to face the hems of the sewn slots to the identical
side so they can be installed away from the view of attendees participating in
the event.
Place the drape
kits panels evenly across the drape support so the drape folds looks uniform.
This will avoid the drape appearing smooth is some places and “bunched up” in
others.
It is a good
idea to create a “drape threading” station (or stations) with a pair of eight
foot tables spaced about 8-10 feet apart. This will likely keep the drape from
getting soiled on the floor and will allow the drape hanger handy access to
them.
Adjust the
length of the drape support to match the uprights previously spaced out before
attempting installation. Just hold the drape support next to the uprights you
will be installing it in and depress the button on the support while sliding it
smaller. When you reach the correct width hang it up.
没有评论:
发表评论